Panacol-USA adhesives are moisture resistant, extremely flexible, and when cured, possess dry, tack-free surfaces. This selection of adhesives is particularly effective with highly plasticized substrates such as PVC, polyethylene, and other flexible polymer blends. High bond strength, extreme flexibility, and low shrinkage contribute to consistent performance after sterilization and aging. Specifically designed for use in medical product assemblies, the adhesives are formulated to meet USP Class VI and ISO 10993 biocompatibility standards, and are compatible with gamma, EtO, and peroxide plasma sterilization processes.
The individual adhesives are capable of bonding multiple substrates including PVC, polyethylene, polycarbonate, acrylic, and styrene. They are ideally suited for IV tubing and connectors, anesthesia masks, breathing bags, and laryngeal mask airways (LMA).
View the breathing circuit component and IV tube-set assembly adhesives listed below for a possible candidate for your application. Please contact Panacol-USA to confirm your product selection and to secure additional application assistance, including samples and process recommendations. In the event that these standard products do not satisfactorily address your performance requirements, Panacol-USA will investigate other solutions that include development of adhesive specifically tailored to the complexity of your application.
|Product Number||Suitable Applications||Viscosity cP mPa||Shore Durometer||24 Hour Water Absorbtion||LEDcure||Bondable Substrates||Comments/Features||Request|
|respiratory product assembly/ IV tube sets/plastics bonding||750-1500||A 40-50||< 2.0%||Yes||thin film PVC, PC, other plastics||UV / Visible light curable adhesive specifically developed to bond flexible PVC and rigid polycarbonate|
|bonding/laminating flexible materials and those with differing CTE values||250-500||A45-65||< 1.0%||yes||wide range of plastics, ceramic, glass,stainless steel||UV/Visible cure, extremely soft, highly flexible, tack-free surface, clear, suitable for medical device assembly|
|bonding PVC and polyethylene components||200-300||D70-79||< 4.0%||yes||PVC, PC, other plastics||UV/Visible cure, best for highly plasticized PVC, tack-free surface, suitable for medical device assembly|
*Note: viscosity variations are typically available, or can be formulated, for all listed products. Please inquire with Panacol-USA Applications Engineering for viscosity ranges not shown in the table.
Contact Panacol-USA for more info.