The Honle LED Spot is a high intensity curing device with a light footprint that is larger than typical LED point sources. It’s 20 x 20mm area of irradiation permits curing of larger adhesive bondlines and potting surfaces. Smaller components may also be batch cured with the LED Spot.
The HP Power Controller is capable of powering up to four LED Spot arrays. They can be programmed to work simultaneously, in sequence, or totally independently to create up to four separate workstations. A power adjustment feature provides the ability to reduce output intensity from 100% to as low as 10% for maximum operating efficiency. Process Flow Control permits full programming of the curing cycle including exposure series using different intensities and dwell time for parts handling.
This unit is available with LED outputs of 365, 385, 395, 405, and 460nm wavelengths. Instant on/off and cool curing temperatures make the Honle LED Spot ideal for use with temperature sensitive materials. Typical applications include the curing of UV adhesives, potting materials, and coatings.
The LED Spot has been developed for all applications requi- ring a most intensive UV irradiation on a larger area. Thanks to its high intensity and the possibility to program complete process sequences, e.g. exposure series with different inten- sities and holding times, shortest cycle and machine throughput times can be realized, especially in fully automa- ted production lines.
|Category:||UV Light Curing Equipment|
|Date||February 28, 2013|
These Operating Instructions describe the LED Spot, its operation and its uses. The safety and warning notices explain the safe, proper handling of the LED Spot.
|File Name||47194b1 LED Spot englisch.pdf|
|Date||March 6, 2013|