LED Curing Equipment

Honle LED UV and LED Visible Light curing equipment offers unique features including intensity output control, multi-cycle programmability, RS232 interface for external programming and operation, and menus that can be displayed in four languages. As LEDs do not emit IR energy, curing occurs at cooler temperatures. This makes LED equipment ideally suited for use with temperature sensitive substrates.

LED Curing Equipment

LED Powerline LC & LED powerdriveAs a recognized leader in UV curing technology, Honle UV offers the broadest range of LED UV curing equipment in the industry. Light footprint options range from 0.5mm diameter point systems to linear arrays that can exceed one meter in length. With Honle LED uv curing equipment, you have the option of selecting the curing wavelength most suitable to the adhesive or sealant being cured. LED output options include 365, 385, 395, 405, and 460 nanometers.

Typical service life of the LED array is 10,000 hours, after which it can be replaced with a new array. LED curing requires no warm-up or cool-down periods during operation, providing instant on/off process control. As LEDs do not emit IR energy, curing occurs at cooler temperatures. This makes LED equipment ideally suited for use with temperature sensitive substrates.

Honle LED equipment offers unique features that include intensity output control, multi-cycle programmability, RS232 interface for external programming and operation, and menus that can be displayed in four languages. Most Honle power supplies will drive multiple LED heads that can be programmed for sequential or independent actuation. Please evaluate the equipment options listed below to select a model that is ideal for your process. Or call Panacol-USA Applications Engineering for assistance with equipment selection and integration.

For maximum efficiency and shortest curing cycle, pair Honle LED equipment with LEDcure adhesives and sealants from Panacol-USA Inc. Click on LEDcure adhesives.

LED Pen 2.0

LED Pen 2.0

The LED Pen 2.0 from Honle is reliable and versatile hand-held UV curing device with output of 365nm wavelength. It produces up to 4800 mW/cm2 of UV curing intensity which is ideal for curing many UV adhesives and sealants. The LED Pen can be activated in three ways: a manual push-button switch on the unit, foot switch, or through a potential-free PLC input.

read more
LED Power Pen 2.0

LED Power Pen 2.0

The LED Power Pen 2.0 from Honle is a high intensity, hand-held UV curing device that is ideally suited for curing UV adhesives in manual or automated production. Weighing only 130 grams, the LED Power Pen produces 10,000 mW/cm2 of UV intensity at 365nm wavelength at a distance of 12mm. The Power Pen can be activated in three ways: a manual push-button switch on the unit, foot switch, or through a potential-free PLC input.

read more
UVAHAND LED

UVAHAND LED

UVAHAND LED is a high-intensity hand-held UV lamp. It is easy to transport, ergonomically designed and ideal for mobile use. Its high intensity irradiation ensures reliable production results within seconds. Available in 365nm or 405nm wavelengths, the UVAHAND LED provides edge-to-edge homogeneous intensity distribution for optimized curing. The high intensity of the 365nm UVAHAND LED brightly illuminates fluorescing compounds for the highest quality inspection processes.

read more
bluepoint LED eco

bluepoint LED eco

The Honle bluepoint LED eco curing system was developed for automated UV adhesive bonding processes requiring high intensity UV curing equipment, (point sources). It possesses the same features as the Honle bluepoint LED with a much smaller power control unit, (65 x 160 x 130 mm). This reduces space consumption in automated assembly lines. Producing up to 20,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes.

read more
bluepoint LED

bluepoint LED

The Honle bluepoint LED curing system was developed for UV adhesive bonding applications requiring high intensity UV curing equipment, (point sources). Producing up to 20,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes. Programmable activation, multi-head capacity, short curing cycles, and long-term reliability make the bluepoint LED the perfect UV LED curing equipment for manual or automated production.

read more
LED Spot 40 IC

LED Spot 40 IC

The LED Spot 40 IC was developed for all applications requiring a compact flood unit with high intensities. The LED assembly, as well as an electronic power control, guarantee a highly intensive and homogenous distribution of light. The recognition of...

read more
LED Spot 100 IC / LED Spot 100 HP IC

LED Spot 100 IC / LED Spot 100 HP IC

The LED Spot 100 IC / HP IC has been developed for all applications requiring a highly intensive UV irradiance over a large area. The LED assembly, as well as an electronic power control, guarantee high intensity and homogenous distribution of light. The...

read more
LED Spot W

LED Spot W

The LED Spot W manufactured by Honle offers very high intensity for rapid curing of most UV adhesives, coatings, and sealants. Compact in size, the Spot W LED head can be easily mounted in space-limited assembly equipment. A 20 x 20mm aperture produces a homogenous light footprint with intensity as high as 20,000 mW/cm2 (405nm). Up to three Spot W LED heads can be actuated from a single LED Powerdrive control unit. Cleanroom compatible, the LED Spot W is available in 365, 385, 395, 405, and 460 nm wavelengths.

read more
LED Powerline AC/IC 820 HP

LED Powerline AC/IC 820 HP

An air cooled high-performance UV LED array for intermediate curing (pinning), final curing for printing applications as well as curing of varnishes or UV-reactive adhesives and pottings. Available in wavelengths of 365/385/395/405 nm +/- 10 nm. This variety allows to adjust the wavelength perfectly to any application. For larger irradiation widths, LED Powerlines are stackable without gap to any lengths.

read more
LEDLINE 500

LEDLINE 500

A highly intensive UV-LED line. Its intensive irradiation ensures reliable production results within seconds. An integrated timer allows the adjustment of irradiation times between 1 second and 19 hours which leads to exactly reproducible curing results. For larger irradiation areas LEDLINES are stackable almost without gap and up to any lengths. LEDLINE 500 is available in emitted wavelengths of 365 nm or 405 nm +/- 10 nm. This allows a precise adaption to the respective application.

read more
Powerline AC/IC HP & LED powerdrive IC (air cooled )

Powerline AC/IC HP & LED powerdrive IC (air cooled )

A high intensity, air cooled LED array that is ideal for curing UV and visible light curable adhesives and coatings. Producing intensity up to 16,000 mW/cm², the AC/IC HP contributes to very fast curing cycles. Two standard sizes are available: 82 mm x 20 mm and 122 mm x 20 mm. These arrays can be stacked to form larger irradiation areas with no intensity gaps. The Powerline AC/IC HP LEDs have a typical service life of > 20,000 hours, and are available in 365, 385, 395, 405 and 460 nm wavelengths.

read more
LED Powerline LC & LED powerdrive (water cooled)

LED Powerline LC & LED powerdrive (water cooled)

The LED Powerline from Honle is a very compact, high-intensity LED curing unit. Delivering over 30,000 mW/cm2 intensity, the LED Powerline is ideal for high-volume curing processes that incorporate robots or conveyors. From its standard size of 76 x 10 mm, the irradiated area can be extended in 40mm increments to any length required. Instant high intensity with no warm-up, and clean room compatible.

read more
LED CUBE 100 IC

LED CUBE 100 IC

The Honle LED CUBE 100 IC is a compact irradiation chamber that can be used in a laboratory or for manual production. By employing the various LED array options, the emission range can be adjusted to various fields of application. Wavelength options include 365, 385, 395, 405, and 460nm. The chamber door is fully integrated with the controller which prevents its opening while in a curing cycle.

read more
LC-2 Mini Conveyor

LC-2 Mini Conveyor

Perfectly suited for LED systems, the Panacol-USA LC-2 Mini Conveyor provides a new option for curing adhesives in cleanrooms and tight work areas. Even the smallest workbench...

read more
UV Meter

UV Meter

The UV Meter from Honle can be used for both broad spectrum UV and LED light systems. A wide range of interchangeable sensors accommodate the measurement of various equipment types and wavelengths. Measurements can be evaluated on a PC or with a PLC via USB connection.

read more