UV Curing Equipment Brochures

From our Tech Library, PDFs for UV Light curing equipment.

NameSizeDescription
Bluepoint 43.9 MiBbluepoint 4 is a high-performance point source for all applications that need maximum UV intensity. Due to its high intensity and the possibility to program complete exposure sequences with different intensities and waiting periods – shortest cycle or machining times can be realized especially in fully automated production lines.
Bluepoint 4 Ecocure3.6 MiBbluepoint 4 ecocure is an economical high-performance point source for all applications that need maximum UV intensity. Due to its high intensity shortest cycle times can be realized.
Bluepoint LED3.2 MiBbluepoint LED has been developed for all applications requiring a most intensive UV irradiation. Thanks to its high intensity and the possibility to program complete process sequences, e.g. exposure series with different intensities and holding times, it is possible to realise shortest cycle and machinethroughputtimesespeciallyinfullyautomated production lines.
Bluepoint LED Eco3.1 MiBbluepoint LED eco has been developed for all applications requiring a most intensive UV irradiation. Thanks to its high intensity and the possibility to program complete process sequences, e.g. exposure series with different intensities and holding times, it is possible to realize shortest cycle and machine throughput times especially in fully automated production lines. Likewise, bluepoint LED eco can be used in the laboratory for manual irradiation.
Bluepoint Lens Types0.6 MiB
JetCURE LED2.0 MiBThe jetCURE LED is a high-performance array for intermediate curing (pinning) and final curing in printing applications. Other applications are the curing of inks, varnishes, adhesives and pottings. The array allows modular (grid 82 mm) and continuously variable control. jetCURE LED is available in the wavelengths of 365/385/395/405 nm +/- 10 nm.
LED Cube 100 IC2.1 MiBThe LED Cube 100 is a compact UV irradiation chamber for use in the laboratory or for manual production. By employ- ing different LED units the emission range is adjustable to various fields of application.
The LED assembly, as well as an electronic power control, guarantee high intensity and homogenous distribution of light. The recognition of LED-malfunction and a comprehensive monitoring function provide very high process stability.
LED Pen 2.02.3 MiBThe LED Pen is an LED-technology based reliable point source with an output spectrum of 365 nm +/- 10 nm.
LED Power Pen 2.02.7 MiBThe LED Power Pen is an LED-technology based reliable point source with an output spectrum of 365/405 nm +/- 10 nm.
LED Powerline AC0.3 MiBThe LED Powerline AC is a high-performance UV LED array for intermediate curing (pinning) and final curing for prin- ting applications. Other applications are the curing of varnis- hes or UV-reactive adhesives and pottings.
The typical LED service life is more than 20.000 hours*. The LEDs can be switched-on and -off as often as required, without any warm-up or cooling phase.
The LED Powerline AC is available in wavelengths of 365/385/395/405 nm +/- 10 nm. This variety allows to adjust the wavelength to the application in question. Integrated air-cooling guarantees a reliable continuous ope- ration over the whole ambient temperature area, without depending on huge external heat exchangers.
LED Powerline AC 410 IC E2.3 MiBLED Powerline AC/IC 410 is an air cooled high-performance UV LED array for intermediate curing (pinning), final curing for printing applications as well as curing of varnishes or UV-reactive adhesives and pottings.
LED Powerline ACIC 410/820 HP Powerdrive 400/12003.3 MiBLED Powerline AC/IC is an air cooled high-performance
UV LED array for intermediate curing (pinning), final curing for printing applications as well as curing of varnishes or UV-reactive adhesives and pottings.
The LED powerdrive IC allows the independent operation of up to 3 LED Powerline AC/IC. Two versions are available:
LED Powerline HP0.2 MiBThe LED Powerline HP is a high-performance UV LED array for intermediate curing (pinning) and final curing for prin- ting applications. Other applications are the curing of varnis- hes or UV-reactive adhesives and pottings.
The typical LED service life is more than 20.000 hours*. The LEDs can be switched-on and -off as often as required, without any warm-up or cooling phase.
The LED Powerline HP is available in wavelengths of 365/385/395/405 nm +/- 10 nm. This variety allows to adjust the wavelength to the application in question. Integrated air-cooling guarantees a reliable continuous ope- ration over the whole ambient temperature area, without depending on huge external heat exchangers.
LED Powerline IC0.3 MiBThe LED Powerline IC is a high-performance array for intermediate curing (pinning) and final curing for printing applications. Other applications are the curing of varnishes or UV-reactive adhesives and pottings.
The typical LED service life is more than 20.000 hours*. The LEDs can be switched-on and -off as often as required, without any warm-up or cooling phase.
The LED Powerline IC is available in wavelengths of 365/385/395/405 nm +/- 10 nm. This variety allows to adjust the wavelength to the application in question.
With its low weight and small dimension the LED Powerline IC can be integrated in the smallest interspaces. The water- cooled unit is appropriate for being used in a clean room.
LED Powerline LC0.3 MiBThe LED Powerline LC is a high-performance array for interme- diate curing (pinning) and final curing for printing applicati- ons. Other applications are the curing of varnishes or UV- reactive adhesives and pottings.
LED Powerline LC & LED Powerdrive4.0 MiBThe LED Powerline LC has been developed for all applications requiring a highly intensive UV irradiance with a low temperature load on the substrate. The LED assembly, as well as an electronic power control, guarantee high intensity and homogenous distribution of light. The recognition of LED-malfunction and a comprehensive monitoring function provide for very high process stability. So, especially in fully automated production lines, repeatable results can be realized even in shortest cycle times.
LED Spot & LED HP controller0.3 MiBThe LED Spot has been developed for all applications requi- ring a most intensive UV irradiation on a larger area. Thanks to its high intensity and the possibility to program complete process sequences, e.g. exposure series with different inten- sities and holding times, shortest cycle and machine throughput times can be realized, especially in fully automa- ted production lines.
LED Spot 100 & LED powerdrive0.4 MiBThe LED Spot has been developed for all applications requi- ring a highly intensive UV irradiance over a large area. The LED assembly, as well as an electronic power control, guaran- tee high intensity and homogenous distribution of light. The recognition of LED-malfunction and a comprehensive moni- toring function provide very high process stability. So, especi- ally in fully automated production lines, repeatable results can be realised even in shortest cycle times.
LED Spot 100 HP IC Powerdrive3.2 MiBHighly intensive UV irradiance over a large area. The LED assembly, as well as an electronic power control, guarantee high intensity and homogenous distribution of light. The recognition of LED-malfunction and a comprehensive monitoring function provide very high process stability. So, especially in fully automated production lines, repeatable results can be realised even in shortest cycle times.
LED Spot 40 IC Powerdrive0.5 MiB
LED Spot W & LED Powerdrive3.1 MiBThe LED Spot W provides a most intensive UV irradiation on a larger area, while having only very small space requirements. Thanks to the external water cooling the extremely small lamp head design offers highest intensity. As the LED Spot does not require an integrated fan, it can also be used in a clean room environment.
LEDLINE 5002.1 MiB
Powerline AC/IC & LED powerdrive IC0.2 MiB
UV Meter1.8 MiBThe Hönle UV-Meter with application-optimized sensors measures exact data that is traceable to the German standard PTB (Physikalisch Technische Bundesanstalt). Different sensors cover wavelengths from 230 nm to 550 nm – UVC, UVB, UVA and VIS. Special LED sensors have been developed for LED-UV systems.
Uvacube 20002.4 MiBThe UVACUBE 2000 is an UV curing chamber for laboratory use and manufacture by hand. Through combining different UV units like direct irradiation or ACM mirror for temperature reduction, and lamps, UVACUBE 2000 can be used for a large variety of applications and offers individual process solutions. The power and timer pre-set are offering high process reliabi- lity. In addition, UVACUBE 2000 meets the highest demands in operational safety and ease of handling.
UVACUBE 4002.0 MiBThe UVACUBE 400 is an economical UV curing chamber for laboratory use and manufacture by hand. Due to various lamp/filter combinations, the spectra can be easily adapted for a large variety of applications.
UVAHAND 2501.8 MiBUVAHAND 250 is a high-intensity handheld UV lamp. It is easy to transport, ergonomically designed and ideal for mobile use.
UVAHAND LED E1.9 MiBUVAHAND LED is a high-intensity hand-held UV lamp. It is easy to transport, ergonomically designed and ideal for mobile use.
Its intensive irradiation ensures reliable production results within seconds. A homogeneous intensity distribution is guaranteed by the arrangements of the LEDs.
UVAPRINT HPV2.0 MiBA compact high-intensity UV curing unit with CAD-designed reflector geometry guaranteeing optimum UV yield. Spectra and arc lengths are easily adapted for different applications by just changing the lamp. UVAPRINT HPV is used for curing UV reactive adhesives, compounds, plastics, inks and lacquers.
UVASPOT2.8 MiBThe UVASPOT ranges are modular high intensity UV units.
They achieve very high uniformity throughout the irradiation field.